97 buick lesabre factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / 97 buick lesabre factory alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: January 20, 2012 at 6:34 AM / IP Logged

Have a customer that wants a starter put in his 1997 Buick LeSabre. He tells me he has had many problems with the factory alarm going off and being a PINTA!!! Is there anyway to totally disable the alarm? I know the disarm wire is light green at the colume..... Could this wire be put to ground permanently so the alarm will never trigger??? This is an older gentleman and he does not want the alarm going off at all.. Thanks in advance!!!!!

Back to Top

kreg357

Platinum - Posts: 7,783

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 20, 2012 at 6:52 AM / IP Logged

Here is a link to the Owners Manual. http://www.extendedgmwarranty.com/owners-manual/buick/1997-Buick-Lesabre.pdf It does not mention any way to program the Security System to OFF. It does mention how to lock the car without enabling the alarm. As described below :

Remember, the theft-detenrrent system won’t activate if you

lock the doors with a key or manual door lock. It activates
only if you use a power door lock switch with a door
open, or the Remote Keyless Entry transmitter. You should
also remember that you can start your vehicle with the
correct ignition key if the alarm has been set off. You must
still shut off the alarm by inserting the key in the door
lock, or by pressing the UNLOCK button on the Remote
Keyless Entry transmitter.

Maybe setting up a 528T timer to automatically pulse the Disarm wire 3 minutes after a Lock signal?

Soldering is fun!

Back to Top

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: January 20, 2012 at 9:10 AM / IP Logged

Does the vehicle have a hood pin wire?

I know this works on Honda's... not sure about the buick (probably not) but if you ground that hood pin wire it will not allow the factory alarm to arm... again, I doubt it will work on this car, but its something to look at. Possibly even the trunk pin???

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Back to Top

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: January 20, 2012 at 7:27 PM / IP Logged

Thanks for your help. Seems he has always had trouble with the factory alarm.. So would like to disable it all together. The disarm wire is lt green negative.. Do you think if it was grounded it would be permanently disarmed???

Back to Top

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: January 21, 2012 at 1:23 PM / IP Logged

Anyone?????

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 buick lesabre factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.