2007-2012 Jeep Patriot Remote Start Pictorial

Home / the12volt's Install Bay / Car Security and Convenience - Alarm/Remote Start Pictorials / 2007-2012 Jeep Patriot Remote Start Pictorial (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 29, 2013 at 4:20 PM / IP Logged

The White sticker with the install guide number might be on the ADS ALSL CH package ( the box it came in with the Flash access hole in the bottom and plastic bag of harnesses ).

Worst case scenario, dump the CH5 harness and go W2W...

Soldering is fun!

Back to Top

Talent421

Member - Posts: 10

Joined: December 02, 2004

Location: United States

Posted: December 30, 2013 at 4:12 PM / IP Logged

I plan on trying 2 more things before I trash the harness and go w2w. Am I going to need relays and resistors to pull that off or will the bypass module handle all that?

Talent421

Back to Top

kreg357

Platinum - Posts: 7,783

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 30, 2013 at 7:42 PM / IP Logged

If you dump the CH5 harness and go W2W, the only thing extra you will need is a 1N4001 diode. The Type 3 install looks

complicated but the bypass module only has 5 connections to the Jeep. The U1280 remote starter only has 4 wire

connections to the Jeep ( +12V constant power, chassis ground, Parking Lights and the Hood Pin ). Then there are

the wire connections between the U1280 and the bypass module. That's it. You could even go D2D between the modules

and then make the wire connections shown with solid Black and the necessary Red lines.

Soldering is fun!

Back to Top

Talent421

Member - Posts: 10

Joined: December 02, 2004

Location: United States

Posted: January 01, 2014 at 2:45 PM / IP Logged

Kreg357,

I just wanted to post a follow up to this remote start install.

Finally got it figured out!!!

I really want to thank you for all your help. You made the difference between success and failure and you saved me about $200 in installation charges that Best buy wanted to do this car.

Thanks again.

Scott

Talent421

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2007-2012 Jeep Patriot Remote Start Pictorial

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.