autopage rs 855 conversion to newer model

Home / the12volt's Install Bay / Car Security and Convenience / autopage rs 855 conversion to newer model

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mpierce77

Member - Posts: 1

Joined: January 28, 2014

Location: Massachusetts, United States

Posted: January 29, 2014 at 12:38 PM / IP Logged

Hi everyone, this is my 1st post on this site. I believe this topic is in the right forum. I currently have an Autopage RS-855 with 2 remotes that no longer work. I've searched high and low to replace the fobs (H50T18 & H50TR03) but they have been discontinued and cannot be found on EBay. Therefore, my 2nd option is to replace the brain of my old unit. I was looking at upgrading to an Autopage C3-RS730 or a C3-RS915 but reuse the wiring. Below are the installation diagrams for all 3 units. It looks like the 730 and 915 have the same diagram

Please advise if this is doable

Thank you

Back to Top

alfredojrv

Member - Posts: 4

Joined: July 01, 2015

Location: Illinois, United States

Posted: July 01, 2015 at 10:13 AM / IP Logged

Did you ever do the swap? I need to do the same for the dame reason.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.