the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

resin cure time under vaccum


Post ReplyPost New Topic
< Prev Topic Next Topic >
sadiq 
Member - Posts: 5
Member spacespace
Joined: October 02, 2014
Location: Pakistan
Posted: October 02, 2014 at 1:15 PM / IP Logged  
I am working on a project to make a blade with fibre that has to be impregnated by resin under the action of vacuum. the resin has to be cured under vaccum pressure (no atmospheric air).
we had a try, and the resin is didn't cured well even after 24 hours.
Tell me is atmospheric air necessary for curing?
tell me how to reduce cure time for resin under vacum?
oldspark 
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: October 02, 2014 at 6:18 PM / IP Logged  
Maybe its too cold in the vacuum?
Infrared heater perhaps?
sadiq 
Member - Posts: 5
Member spacespace
Joined: October 02, 2014
Location: Pakistan
Posted: October 04, 2014 at 1:50 AM / IP Logged  
tell me any book that tell the basic of resin types, fibreglass types, curing, etc
sadiq 
Member - Posts: 5
Member spacespace
Joined: October 02, 2014
Location: Pakistan
Posted: October 04, 2014 at 1:52 AM / IP Logged  
book should be available in internet to read or download.
oldspark 
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: October 04, 2014 at 10:44 AM / IP Logged  
google
lunchboxcritter 
Member - Posts: 2
Member spacespace
Joined: March 13, 2008
Location: Florida, United States
Posted: October 05, 2014 at 8:53 PM / IP Logged  
Epoxy or Poly Resin?
sadiq 
Member - Posts: 5
Member spacespace
Joined: October 02, 2014
Location: Pakistan
Posted: October 09, 2014 at 11:54 AM / IP Logged  
polyster resin. 555 resin. this is website http://alkhair.com.pk/
sadiq 
Member - Posts: 5
Member spacespace
Joined: October 02, 2014
Location: Pakistan
Posted: October 09, 2014 at 12:06 PM / IP Logged  
our project is related to mechanical engineering. not chemistry. We just want to cure somehow.
tell me some ways to reduce the viscosity of resin, the shopkeeper said, to mix the styrene. What do you say? will it work ? and what about the cure time when styrene will be added.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer