viper 5906 + dball on mit outlander sports

Home / the12volt's Install Bay / Car Security and Convenience / viper 5906 + dball on mit outlander sports

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

sckw

Member - Posts: 15

Joined: February 04, 2015

Location: Malaysia

Posted: March 04, 2015 at 8:41 PM / IP Logged

and the diagram doesn't show that i need to connect any ignition wire from the dball2 module.. because im using d2d mode and it show ignition wire is on 10pin black harness.. correct me if im wrong.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 04, 2015 at 10:30 PM / IP Logged

You're right. I was looking at some other diagram while at work.

Main Harness, 6-pin connector

1 RED (+)12VDC CONSTANT INPUT

2 BLACK (-) CHASSIS GROUND

3 BROWN (+) SIREN OUTPUT

4 WHITE/ BROWN PARKING LIGHT ISOLATION

5 WHITE PARKING LIGHT OUTPUT +

Remote Start, 10-pin heavy gauge connector

2 RED / BLACK (+) FUSED 12V ACC/STARTER INPUT

5 RED (+) FUSED 12V IGNITION 1 INPUT

7 VIOLET (+) STARTER OUTPUT (CAR SIDE)

8 ORANGE (+) ACCESSORY OUTPUT

10 PINK (+) IGNITION 1 INPUT/OUTPUT

ground Neutral safety wire

plug in switch

change programming to automatic

you need to do all of these above, then program the dball

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

sckw

Member - Posts: 15

Joined: February 04, 2015

Location: Malaysia

Posted: March 04, 2015 at 11:27 PM / IP Logged

tedmond wrote:

You're right. I was looking at some other diagram while at work.

Main Harness, 6-pin connector

1 RED (+)12VDC CONSTANT INPUT

2 BLACK (-) CHASSIS GROUND

3 BROWN (+) SIREN OUTPUT

4 WHITE/ BROWN PARKING LIGHT ISOLATION

5 WHITE PARKING LIGHT OUTPUT +

Remote Start, 10-pin heavy gauge connector

2 RED / BLACK (+) FUSED 12V ACC/STARTER INPUT

5 RED (+) FUSED 12V IGNITION 1 INPUT

7 VIOLET (+) STARTER OUTPUT (CAR SIDE)

8 ORANGE (+) ACCESSORY OUTPUT

10 PINK (+) IGNITION 1 INPUT/OUTPUT

ground Neutral safety wire

plug in switch

change programming to automatic

you need to do all of these above, then program the dball

What you mean is just connect all the wire above then connect the D2D wire to dball thats it?

sckw

Member - Posts: 15

Joined: February 04, 2015

Location: Malaysia

Posted: March 04, 2015 at 11:57 PM / IP Logged

But i just want to try the dball module whether working with my vehicle or not ... so i just connect..

1.Can high

2.Can low

3.12v

4.Ignition

5.Ground

and the D2D wire to remote start module..

but still no luck that dball module still in red solid light.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 07, 2015 at 5:58 PM / IP Logged

like i mentioned, connect all the wires then try to program the dball. if it does not work then time to hardwire everything.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.