the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Avital 4301 in 2002 Jeep GC no D2D lights


Post ReplyPost New Topic
< Prev Topic Next Topic >
slater1 
Member - Posts: 1
Member spacespace
Joined: February 21, 2015
Location: Arkansas, United States
Posted: February 21, 2015 at 7:49 PM / IP Logged Link to Post Post Reply Quote slater1
I've been fighting with my install for about 2 days now. I installed the Avital and DBALL2 with soldered connections and RS function is working but the bypass module is not registering to the avital unit.
My Problems:
Avital Unit does not indicate when it is in D2D mode which should be a 5 blink signal on the led @powerup (no lights on powerup). I've grounded the WHITE/ blue wire to switch modes but never get any indication.
DBall2 will not learn the key. I've followed the procedure to get the bypass into program mode (hold program button while plugging in harnesses).
I've seen several that have also had issues getting the Avital into D2D mode.
Any thoughts are appreciated
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: February 23, 2015 at 10:56 AM / IP Logged Link to Post Post Reply Quote kreg357

A few thoughts :

Is the DB-ALL2 flashed with the correct firmware ( 402.CHRYSLER2 ) for your application?

I have seen that issue with Avital 4103's before.  The LED does not respond when trying to switch modes between ESP/Bitwriter and DBI D2D.

Not sure how to straighten it out.  For me, it wasn't an issue.  I used the Bitwriter to set the options and wired it up in W2W mode.  I have
found that W2W always works & is easier to troubleshoot.  It's worth the few extra minutes on the bench for the reliability it provides.

Soldering is fun!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer