the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ford focus mk2.5 eu 2008


Post ReplyPost New Topic
< Prev Topic Next Topic >
errolzkii 
Member - Posts: 3
Member spacespace
Joined: March 02, 2015
Location: Italy
Posted: March 02, 2015 at 8:33 AM / IP Logged Link to Post Post Reply Quote errolzkii
Hi everyone, i need the wiring diagram for a ford focus mk2.5 2008 eu version Start/Alarm keyless etc..
Thanks in advance!
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 02, 2015 at 10:09 AM / IP Logged Link to Post Post Reply Quote howie ll
No easy answer, you're right on the changeover for the electrical systems.
How to test:-
If starter wire at the ignition switch is grey/black, then earlier.
If starter wire at ignition switch is either 1 or 2 blue/white then later.
Find out and I'll tell you from there.
The reason being the lock and door trigger wires are completely different.
It would be easier to use a Viper/Clifford system with DB-ALL to cover things like door, hood, hatch and hatch release.
errolzkii 
Member - Posts: 3
Member spacespace
Joined: March 02, 2015
Location: Italy
Posted: March 04, 2015 at 3:37 AM / IP Logged Link to Post Post Reply Quote errolzkii
@ser howie thanks for reply
I have grey/black wire in ignition switch,
Now i cant find power lock BLACK/ red an inlock yelow/black.. Hope you can help m thanks.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 04, 2015 at 3:47 AM / IP Logged Link to Post Post Reply Quote howie ll
Look for the CEM module, combining fusebox and body control.
Plug underneath marked "cookpit" BLACK/ orange lock and BLACK/ green unlock.
If you can't find them then you need a CAN bus module such as the DEI DB-ALL2.
There's a major importer in Italy.
errolzkii 
Member - Posts: 3
Member spacespace
Joined: March 02, 2015
Location: Italy
Posted: March 06, 2015 at 9:33 AM / IP Logged Link to Post Post Reply Quote errolzkii
Thanks again sir! How about othere wire like door trigger,trunk, horn etc.. Can i find them all in gem module?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 06, 2015 at 9:53 AM / IP Logged Link to Post Post Reply Quote howie ll
All doors, BLACK / YELLOW, plug at top of CEM module. Not called a GEM from 05, now called CEM.
Hatch, blue/black, loom under rear seat.
Hood add a switch.
All the dome lights, (aka courtesy, interior and hatch) diode to the hot (orange primary),
1N4004, band towards light bulb.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer