astrostart 2205a

Home / the12volt's Install Bay / Car Security and Convenience / astrostart 2205a

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

araz2012

Member - Posts: 5

Joined: March 05, 2015

Posted: March 05, 2015 at 10:15 PM / IP Logged

Hey guys need some help I have an astrostart 2205a for some odd reason it's not starting the car anymore after replacing the remote it cranks it over than It shuts off right away otherwise all other functions work.

it has an on/off switch that's turned on and hood pin that is pushed down when hood is closed. It's on 2004 civic

Thanks

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 07, 2015 at 5:56 PM / IP Logged

any light flashes after shutdown?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

araz2012

Member - Posts: 5

Joined: March 05, 2015

Posted: March 07, 2015 at 7:22 PM / IP Logged

I got it to start and stay on just did a tach relearn

found this online

reprogrammed it to a 6 cylinder and 800 rpm setting as per manual (dip switch 1,56 up/press brake/dips 1,56 off/press brake)

But it's only a 4 cylinder I am not sure to program to 4 cylinder now the starter does not disengage right away 8 sec later when car is on remone start it finally disengage. .any way to fix this issue?

Back to Top

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 07, 2015 at 9:01 PM / IP Logged

set it for 1cyl and program. was never an astrostart user, but have read 1cyl works everytime

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

araz2012

Member - Posts: 5

Joined: March 05, 2015

Posted: March 07, 2015 at 10:00 PM / IP Logged

How would I program to cyl-1 is it just dip switch one up press break or something else?

Back to Top

pomerlo

Member - Posts: 9

Joined: November 11, 2004

Location: Canada

Posted: March 23, 2015 at 10:23 PM / IP Logged

look in the Downloads/Manuals section you'll find the manual for the 2205U. It might help you !

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.