the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Professional Needed For Subwoofer Box


Post ReplyPost New Topic
< Prev Topic Next Topic >
samual95 
Member - Posts: 1
Member spacespace
Joined: March 08, 2015
Location: Michigan, United States
Posted: March 08, 2015 at 12:17 PM / IP Logged Link to Post Post Reply Quote samual95
Hello all! This is my first post here!
I recently purchased an Re Audio XX 12 v2 and i need help building the perfect box for it. I'm also wondering about the material to build it with. I've done some research and I'm under the impression that the most dense wood is the best. So would oak work? Or would MDF be better? (cost isn't an issue)
I've ran the parameters through 2 different programs, along with the box recommended by RE, and im rather confused by the results.
WinISD says i need a 1.594ft^3 box tuned to 27.4hz
Box-Port design II says i need a 3.19ft^3 box tuned to 27.4 hz
Re says i need a 4.98ft^3 box tuned to 32.07hz
See my confusion?? haha
I'm going for top tier SPL here. The bass needs to be perfect.
I listen to a lot of dubstep/electronic music, some rap and rock, some country, but mainly heavy hitting dubstep.
If someone could give me some more insight on this i would greatly appreciate it!
Here are the T/S parameters from the RE website to give you all a place to start.
I bought the 2ohm dual voice coil Re xx 12
XXv2 12D2-D4
Re = 0.9870 ohms
Fs = 27.5057 Hz
Zmax = 11.9128 ohms
Qes = 0.4415
Qms = 4.8876
Qts = 0.4049
Le = 1.1750 mH (at 1 kHz)
Diam = 255.0000 mm ( 10.0394 in )
Sd = 51070.5151 mm^2( 79.1595 in^2)
Vas = 44.5909 L ( 1.5747 ft^3)
BL = 10.3671 N/A
Mms = 278.1974 g
Cms = 120.3485 uM/N
Kms = 8309.2002 N/M
Rms = 9.8369 R mechanical
Efficiency = 0.1975 %
Sensitivity= 84.9733 dB @1W/1m
Sensitivity= 94.0612 dB @2.83Vrms/1m
Krm = 10.835E-03 ohms Freq dependent resistance
Erm = 690.315E-03 Rem=Krm*(2*pi*f)^Erm
Kxm = 57.137E-03 Henries Freq dependent reactance
Exm = 565.004E-03 Xem=Kxm*(2*pi*f)^Exm

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer