2009 Corolla Japanese Made.

Home / the12volt's Install Bay / Car Security and Convenience / 2009 Corolla Japanese Made.

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

cherxiong

Copper - Posts: 164

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 10, 2015 at 1:26 PM / IP Logged

Please help me identify the ignition switch wire.

I have 8 pin plug.

Pin 1 has a white wire,

Pin 2 has two black wires,

Pin 3 has a yellow wire,

Pin 4 is emptied,

Pin 5 has 2 white wires.

Pin 6 has a white wire,

pin 7 has a Gray wire,

Pin 8 is emptied.

Thanks in advance.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 10, 2015 at 1:39 PM / IP Logged

TEST

With first ACC, then IGN, then crank.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 10, 2015 at 1:44 PM / IP Logged

You've got 2 X IGN., 2 X start, ACC and at least 1 12V+ constant input.

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 10, 2015 at 3:18 PM / IP Logged

Thank you so much Howie II

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 10, 2015 at 5:59 PM / IP Logged

Howeii. Is it possible to have two 12DCV constant. Two pin always stay at 12DCV when I tested.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 10, 2015 at 6:40 PM / IP Logged

Yes, nearly always on Toyotas. Sorry, I should have mentioned that above.

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 11, 2015 at 9:07 AM / IP Logged

Thanks again for confirming, your time, and your help. I have more confidence now.

:))))

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 12, 2015 at 11:14 AM / IP Logged

Howeii, sorry to bother you again. I am trying to hook up my remote car starter. My question is why do I have two start wires in one pin (Pin 5)? How do I know which wire to connect my starter wire out put from the remote starter. Also the Accessory also has two wires. Howeii , please advise.

My remote starter:

Remote Start, 8-pin connector

1. RED / BLACK (+) 12VDC CONSTANT INPUT for ACC and starter relays

2. PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY

3. PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT

4. RED (+) 12VDC CONSTANT INPUT for ignition 1 relay

5. VIOLET (+) STARTER OUTPUT

6. ORANGE (+) ACCESSORY OUTPUT

7. RED / WHITE (+) 12VDC CONSTANT INPUT for ignition 2 and flex relays

8. PINK (+) IGNITION 1 INPUT/OUTPUT

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 12, 2015 at 11:21 AM / IP Logged

Hook the violet to either if they share a pin.

You should have 2 IGN. wires pink to one, pink/white to the other.

Orange to one ACC then H2 orange (thin wire) to relay 85

Relay 86 and 87 to 20 amp fused constant.

30 to second ACC. Diode 1N4004 across 85 and 86, band to 86.

Pink/black not used.

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 12, 2015 at 11:43 AM / IP Logged

Thanks.

How about these two wires below here. Should I hook them to the constant wires of the key switch? or "Do Not Use" like the Pink/Black you've mentioned

1. RED / BLACK (+) 12VDC CONSTANT INPUT for ACC and starter relays

7. RED / WHITE (+) 12VDC CONSTANT INPUT for ignition 2 and flex relays

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.