2009 Corolla Japanese Made.

Home / the12volt's Install Bay / Car Security and Convenience / 2009 Corolla Japanese Made.

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

cherxiong

Copper - Posts: 164

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 13, 2015 at 9:33 AM / IP Logged

very informative

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 13, 2015 at 9:38 AM / IP Logged

Howeii,

2009 Corolla Japanese Made. - Page 4 -- posted image.

if you see me doing things, you probably pick me on a lot of stuff not just that Pin 7. 2009 Corolla Japanese Made. - Page 4 -- posted image.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2015 at 9:38 AM / IP Logged

What worries me is you mentioned Japanese build. Is this a right hand drive JDM car or one built for sale in the US?

If it's the second then the software you downloaded should be fine.

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 13, 2015 at 9:53 AM / IP Logged

It's the one built for sale in the USA. : ). Left hand drive.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2015 at 10:08 AM / IP Logged

OK then the software should be OK.

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 13, 2015 at 11:06 AM / IP Logged

Howeii and Ted, This might be a stupid question, but which pin from the Auxilary/Shutdown Harness 24-pin connector is the parking light wire from the remote starter to connect to the Pin 18 of the 20 pin plug white connector at the headlight switch of the car.

The diagram from DBALL2 shows that I need to make this connection.

Pin 13 : BLACK/ White*** = (-) Neutral Safety/Parking Brake Input, is the closest one to the parking light mentioned in the diagram.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2015 at 11:13 AM / IP Logged

Are you looking at type 1?

I can't see what you're talking about.

Pin 13 is handled by D2D on the DB-ALL, if auto just ground pin 13 BLACK/ white.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2015 at 11:21 AM / IP Logged

You will also need to hardwire from the H2 dark blue status wire to the key sense wire,

ignition key switch or dash fuse box, white 32 pin plug (2E), pin 23.

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: March 13, 2015 at 1:44 PM / IP Logged

Yes. I am talking about Type 1. I got the Hard wire for the key sense. Just not sure about the Parking Light connection on the diagram.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2015 at 2:18 PM / IP Logged

Look further down, it will show you what type of connector and the colour.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.