Box for Pyle PLPW15D, Opinions Welcomed

Home / the12volt's Install Bay / Car Audio / Box for Pyle PLPW15D, Opinions Welcomed

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

87pontiac

Member - Posts: 31

Joined: September 15, 2009

Location: New Brunswick, Canada

Posted: March 16, 2015 at 4:35 PM / IP Logged

Pyle PLPW15D

1000W Subwoofer DVCTHIELE-SMALL PARAMRTERS

Resonance Frequency Fs: 29.02 HZ

DC Resistance Re: 3.4ohm+3.4ohm

Mechanical Q Factor Qms: 3.94

Electrical Q Factor Qes: 0.5199

Total Q Factor Qts: 0.4593

Equivalent Cas air load Vas: 195.68 L

Surface Area of Cone Sd: 0.082 m2

Efficiency Bandwidth Product EBP 55.8

Voice Coil Over Hang X-max 8 mm

Mms......146.6g

Cms.....0.2052

Rms.....6.78446

Re.....3.4ohm

BL.....13.22220Tm

Dd.....12.72in

Le.....0.00

fLe.....0.00

KLe.....0.00

Xmax.....8.00mm

Vd.....40in>3

no.....0.8945

Znom.....6.000ohm

Looking for some advice for a box. Suggested is 2.1ft3 at 44hz ported (6" diameter by 9' long tube)

''

Available box size is 35" x 18" x 25"

Subs are only getting 300W (150w/coil)

Listen to alot of bass songs hip hop, Dance,Club......

Thanks for help

Ron

98 Sunfire GTX

Canada

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.