2012 GMC Sierra Premium

Home / the12volt's Install Bay / Car Security and Convenience / 2012 GMC Sierra Premium

Welcome Guest :)

Members

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: March 25, 2015 at 10:49 AM / IP Logged

Can anyone tell me where to get the door trigger on this 2012 premium Sierra... There is the regular grey/blk at the BCM..that is not it....All my sheets say base model at the bcm pink plug...I do not see a pink plug...white and brown!!!! Thanks

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 25, 2015 at 1:10 PM / IP Logged

on a premium its at the driver door window switch. pin 13

I wouldn't waste time fishing 2 wires for door pins. Instead, white plug at BCM pin 5 Grey (+) is the dome light wire. use this for triggers.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: March 25, 2015 at 2:01 PM / IP Logged

I have always got the grey/blk at the BCM. The dash lights stay on longer than the dome and auto lights. For about 8 mins. But only in the shop. In the day light it is not a issue. On the base models I just pulsed the grey/blk with the rearm wire to fix it...

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 25, 2015 at 2:47 PM / IP Logged

didnt use a convenience module?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: March 25, 2015 at 2:53 PM / IP Logged

Yes...I use all I data...flashed DL-GM10...I am emailing IData tech support...You would think that disarm wire would be in the harness from the door!

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 25, 2015 at 2:57 PM / IP Logged

so you're having an issue with rap shutdown?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: March 25, 2015 at 3:06 PM / IP Logged

Radio shuts down...just the instrument lights stay on....but only if the truck is in the shop...then the instrument lights stay on for 10 mins....out in the daylight...everything shuts off.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 25, 2015 at 3:16 PM / IP Logged

premium has autolights. regardless of the position you put it in (auto, on or off) the vehicle will resort to auto for safety reasons when it sees ignition.

try pulsing the autolight wire @ the bcm, White plug dark green (-) after the vehicle shuts down. This should shut your cluster lights as well.

The way i see it- the vehicle has a photoelectric sensor somewhere on the dash, or rear view mirror. Under poor lighting conditions, the vehicle keeps the cluster lit for some ambient lighting (in the event the dome light was off) for safety. Outside, its bright so no need to keep it on. Pulsing the autolight wire would simply tell the bcm to shut off all lighting. Just my take on it. Also note, the cluster is all LED based. 10minutes is hardly a significant draw to run that battery flat.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: March 25, 2015 at 3:49 PM / IP Logged

Showed the customer and she was not concerned...I have another Premium coming next week...I will give it a try...Thanks you are the Man!!!!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.