keyless ignition

Home / the12volt's Install Bay / General Discussion / keyless ignition

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bluevolt

Member - Posts: 6

Joined: April 12, 2015

Posted: April 13, 2015 at 7:10 PM / IP Logged

Hi,

I noticed that there was a couple of forums that had people touch on doing a keyless ignition push button system, but none with detailed information. I was hoping that to help everyone who is interested in doing this that one or some of you on this website can give detailed information on this.

Here is the scenario, I have an Automatic 97 Honda Civic EX with a Viper 5706v car alarm that is a 2way and remote start. My ignition has been damaged by a thief and i cannot replace the ignition since the steering column was damaged. Therefore, I want to be able to start my car with a push button/switch without use of any keys. The button must engage all 3 steps of the ignition process, Acc 1, Acc 2, and momentary start. With no separate RFID unit, if anything i want to use my 2way remote as a key FOB.

Here is a video link showing someone successfully doing this: https://www.youtube.com/watch?v=_JRSkToc1Yg. Yes I tried contacting him with no success.

Thank you in advance everyone. Please use as much images and videos as possible.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.