pulsed horn to constant output

Home / the12volt's Install Bay / Car Security and Convenience / pulsed horn to constant output

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stevemec

Member - Posts: 1

Joined: April 16, 2015

Location: Spain

Posted: April 16, 2015 at 1:35 PM / IP Logged

Hi All, need a little help.

I have programmed the auxiliary horn \ pager \ siren output wire of my vehicle alarm to pulsed output and connected it to the vehicles horn via a relay

now when the alarm is triggered, Ive now got the stock constant under bonnet siren + very loud beep....beep....beep horn.

I have added another siren + strobe inside the vehicle but need this fed with a constant feed

Anyone know what is that best way of doing this ?

Thanks

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 16, 2015 at 3:56 PM / IP Logged

https://www.the12volt.com/relays/relaydiagram22.html

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.