Python 4206P Remote Start 2 Way Remote Guide

Home / the12volt's Install Bay / Car Security and Convenience / Python 4206P Remote Start 2 Way Remote Guide

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

highflyer2488

Member - Posts: 23

Joined: January 13, 2014

Location: Minnesota, United States

Posted: January 15, 2014 at 2:40 PM / IP Logged

Hello!

I'm looking for an installation manual for a Python 4206P R/S. I've searched through the provided manuals on this forum, but with my limited knowledge I'm not sure which manual would safely apply to my unit. I appreciate any help!

Thanks

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 15, 2014 at 6:45 PM / IP Logged

The Viper 5301, Clifford 1.3x, or the Python 580 should be the same. The differences will be in the number of connectors.

The older ones will have a 7 pin, and two 5pin harness, or an 18 pin Aux/Remote start input/output harness. Yours probably has a 24 pin harness.

There is a download for the Viper 5301 with 18 pin harness

Also try Viper 4204 in the downloads section. That list the 24 pin manual

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

highflyer2488

Member - Posts: 23

Joined: January 13, 2014

Location: Minnesota, United States

Posted: January 15, 2014 at 8:04 PM / IP Logged

Thank you, my friend from God's country!

Back to Top

highflyer2488

Member - Posts: 23

Joined: January 13, 2014

Location: Minnesota, United States

Posted: April 23, 2015 at 10:38 AM / IP Logged

Hello,

I'm looking for some sort of guide or cheat sheet for alarms pertaining to my Python 2-way remote. Mostly because I have no idea what the different chimes and beeps mean along with light combinations and I can't find any detailed info. It's a 4206P, but I'm sure it shares the same programming with many other models and brands.

Also, I had my remote go off today (in company training no less) for no apparent reason. In my haste to get it to shutup, I think I remember the function and unlock button lighting up. It was making the same chime that it does when the remote start function is reaching its timer and the vehicle is about to shutdown. However, the vehicle was not running. Could it be low battery for the remote? It went off twice within maybe 2 or 3 minutes. Thinking the first time was a fluke, I just let it slide, but the second time the instructor was annoyed...

Thanks for any help

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 23, 2015 at 10:47 AM / IP Logged

Go to Python.com, then support. It will allow you to download the complete manual.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.