2014 Toyota Camry Viper 5706v with Fortin EVO-Al

Alright will do. Just wasn't sure and was curious.

Thinking about chassis ground. On Toyotas there are many, most 10mm, some 12mm spanner size bolts in the kickwell. Use one of them with the paintwork scraped to bare metal, buy a 6mm (10mm spanner) or 8mm (12mm spanner) ring terminal, red colour code, also Radio Shack etc.(6mm = 1/4", 8mm =5/16"). Don't use an existing grounding point there can be inducted interference problems.

Another question I had is Kregs post says to flash the evo-all with DBI 6.79.25. All I'm showing from the flash link manager is 79.24 and 79.25 beta. Are you referring to the beta firmware or is it a firmware that isn't available through the flash link manager?

No idea, sorry, you'll have to ask Kreg. Or better still call Fortin. I've had to do it from the UK. Mind you .25 beta should be the same.

Alright thanks. I will use your suggestion on the ground wire stuff and will try to get in touch with Fortin between now and doing this install. Maybe Kreg will respond with some help. Thanks again to you both.

You might have to wait for Kreg, he sometimes works night shifts.

Alright no worries. I'm same way just happened to be up as I hadn't made it to bed yet but am turning in now.

Huh? I'm having dinner in 3 hours, it's 5:15pm.

It's 11am here. Kreg pmd me with the info. Thanks again to both of you and I am very glad I found this forum as I'm in the country with the only viper installer within a hundred miles being best buy and they have a bad track record in this area for car electronics so I don't trust them plus their high fees

Wish I could help you more but Cams, Maxis and Legends all got wiped out around 03 in Europe, killed by Audi and BMW.