the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Using car horn with alarm system


Post ReplyPost New Topic
< Prev Topic Next Topic >
swishs2k10 
Member - Posts: 4
Member spacespace
Joined: May 28, 2015
Posted: May 28, 2015 at 7:44 PM / IP Logged Link to Post Post Reply Quote swishs2k10
Can some walk me through connecting a relay to my car alarm system so I can use my car horn instead of siren.
swishs2k10 
Member - Posts: 4
Member spacespace
Joined: May 28, 2015
Posted: May 28, 2015 at 7:44 PM / IP Logged Link to Post Post Reply Quote swishs2k10
Ford Expedition
2003
davep. 
Gold - Posts: 641
Gold spacespace
Joined: May 27, 2011
Location: California, United States
Posted: May 28, 2015 at 8:37 PM / IP Logged Link to Post Post Reply Quote davep.
You didn't say which alarm, but if it's a DEI, most of them can be programed for "horn honk" on the siren wire. There's a 6 or 8 pin connector at the base of the steering column. Dk blue wire pin 6 (-) trigger is horn. Test, to be sure. DEI sends a (-) pulse, and the dk blu accepts it. No relay required.
swishs2k10 
Member - Posts: 4
Member spacespace
Joined: May 28, 2015
Posted: May 28, 2015 at 9:37 PM / IP Logged Link to Post Post Reply Quote swishs2k10
I'm using a viper 5000 car alarm system. That's been installed for a while now. I know the location of the blue wire and I tested it today with a tester. So are you saying I don't need this relay?
davep. 
Gold - Posts: 641
Gold spacespace
Joined: May 27, 2011
Location: California, United States
Posted: May 28, 2015 at 9:50 PM / IP Logged Link to Post Post Reply Quote davep.
Yes, you WILL need a relay for the 5000. It only has the brown (+) siren output. Program 3-1 to "horn honk".
wire the relay as follows:
30 = Ground
87 = Horn blue wire @ steering column.
85 = Ground
86 = Brown siren/horn honk output from 5000.
swishs2k10 
Member - Posts: 4
Member spacespace
Joined: May 28, 2015
Posted: May 29, 2015 at 11:24 AM / IP Logged Link to Post Post Reply Quote swishs2k10
Thank you very much. I was able to wire my relay up and the car horn works perfect.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer