2008 Cadillac escalade power remote wire.

There is no wire diagram for the radio in stall for 2008 Cadillac escalade. I need a power accessories wire please help

There is not a switched wire at the radio. What are you trying to do?

I have a Bluetooth I simple to install. It has three wire's grd,12v pos and a ing switch pos wire. 12 volt and grd wire easy, but there is no ing switch wire. According to another site I was on.

Look just to the left of the brake pedal, on the firewall. There is a junction box, remove the cover, there are several terminals in that box. The one you are looking for is the one at the lower left corner. It is the pin in bottom row all the way to the left side of the box. This terminal remains hot until the door is opened. So the bt will work as long as the radio is powered up.

Ok I was told to use the brown wire coming from Ing switch

1978malibu wrote: Ok I was told to use the brown wire coming from Ing switch

DO NOT TOUCH THIS WIRE. it is an accessory wire, but it can't be used to power ANY aftermarket equipment. Look in the Junction Box "iam idiot" posted.

Ok, so just use a spade push it in and thats it

Ok, so just use a spade push it in and thats it

Pretty much. Your PM sounds like you have the correct terminal. Use a volt meter to verify.

I have a safe inline checker with key on power key off grd. Do I need to fuse this or not