axxess AX-ADGM01

Home / the12volt's Install Bay / General Discussion / axxess AX-ADGM01

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

timo123451

Member - Posts: 49

Joined: September 16, 2010

Location: Iowa, United States

Posted: June 26, 2015 at 7:26 PM / IP Logged

I'm using an axxess ax-adgmo1 to intall a Pioneer 5700bhs. There is a purple and green wire set that comes out of the thirty pin connector.I have the bose system with no navigation. I'm not sure if these wires need to be connected to the head unit or if they are unused? The wires also have capactiors soldered in line. Any help would be greatly appreciated.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.