the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2013 Ford Focus alarm only unlocks drivers door


Post ReplyPost New Topic
< Prev Topic Next Topic >
djrico724 
Member - Posts: 40
Member spacespace
Joined: August 21, 2008
Location: California, United States
Posted: June 28, 2015 at 1:35 AM / IP Logged Link to Post Post Reply Quote djrico724
I'm working on a 2013 Ford Focus it is I one touch down only power window. It calls for type F door locks one wire setup using GREEN/ purple wire at BCM brown 60 pin pin 55 bUt it only unlocks the drivers door none of the other doors unlock works fine with factory remote not sure if there's a other way
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: June 28, 2015 at 5:25 AM / IP Logged Link to Post Post Reply Quote howie ll
This works for Euro versions. Go into driver's door, there are a number of black wires going into driver's door module. 3 wires will give you lock unlock and deadlock. Diode from lock to deadlock using 2 wires into door.
Or use a DB-ALL2 or Fortin equivalent CAN module will do all that.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: June 28, 2015 at 9:03 AM / IP Logged Link to Post Post Reply Quote howie ll
Is this PTS or key?
djrico724 
Member - Posts: 40
Member spacespace
Joined: August 21, 2008
Location: California, United States
Posted: June 28, 2015 at 1:06 PM / IP Logged Link to Post Post Reply Quote djrico724
It's key I did check there's no door lock module in drivers door
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: June 28, 2015 at 1:13 PM / IP Logged Link to Post Post Reply Quote howie ll
Wait I'm doing a diagram that might help.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: June 28, 2015 at 2:03 PM / IP Logged Link to Post Post Reply Quote howie ll
This is difficult because here in the UK we're on V7 of the Fiesta and V4.5 of the Focus.
According to Directechs this grey plug should be on your CEM module.
Depending on spec and alarm/RS this will give you ignition lock/unlock if programmed and deadlock + factory alarm/release deadlock/factory alarm disarm:-
fiesta,_focus_locks.png

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer