Install Wiring - Status Output Wire & Hello

Home / the12volt's Install Bay / Car Security and Convenience / Install Wiring - Status Output Wire & Hello

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

jayson wonder

Member - Posts: 23

Joined: July 04, 2015

Location: Nova Scotia, Canada

Posted: July 29, 2015 at 9:10 AM / IP Logged

howie ll wrote:

It's the clutch switch that was doing the damage, that brown is a GROUND.

You need to feed 12V+ to the blue when starting.

If you join the violet to the blue, it should start without depressing the clutch.

Oh, well that is unexpected. This is good to know. Not sure why I thought it needed 12V

Back to Top

jayson wonder

Member - Posts: 23

Joined: July 04, 2015

Location: Nova Scotia, Canada

Posted: July 29, 2015 at 5:27 PM / IP Logged

howie ll wrote:

Or even easier, take a feed from the constant to the white from your PTS, then to the start for 1 second.

Nope, this does not work even with brown disconnect, so clearly my wiring is wrong. Before taking it all apart and starting again with what I have learned I did some additional testing with things hooked up as is.

White & Brown have .3 - .4 volts running through when system is on ACC.

White has 12V when always on when disconnected from relays

Brown has .3 - .4 volts when disconnected from clutch.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.