Viper 3105 in a 2006 Silverado Extended Cab

Home / the12volt's Install Bay / Car Security and Convenience / Viper 3105 in a 2006 Silverado Extended Cab

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

duurmeehr

Member - Posts: 5

Joined: July 08, 2015

Location: Alabama, United States

Posted: July 11, 2015 at 3:00 PM / IP Logged

I have the alarm working now.

I do need some advice on protecting the rear of the truck. The sensor internal to the alarm is working fine in the cab of the truck when I bump on the cab body it responds. Where the bed goes on a normal pickup I have a service body. I can beat on it and the alarm does not respond. I suspect it may be to mechanically isolated from the cab? The service body has 9 doors to it's just not practical to protect each door with a pin switch. Can I add a sensor in the back like a 504D or is there a better option???

I will lick the door actuator part when they arrive. I have a concern about the stroke on the actuator possible being longer than the stroke on the factory door rod causing wear on the locking system but I may be overthinking that.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 11, 2015 at 3:31 PM / IP Logged

Yes a proximity detector would be second choice to pin switches.

Yes, you ARE overthrowing.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.