the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

12 volt air horn compressor really loud


Post ReplyPost New Topic
< Prev Topic Next Topic >
joebiwan29 
Member - Posts: 1
Member spacespace
Joined: July 25, 2015
Location: United Kingdom
Posted: July 25, 2015 at 2:32 PM / IP Logged Link to Post Post Reply Quote joebiwan29
Hi all
I've just finished up installing some new air horns in my car, they're standard air horns with a small compressor powered through a relay.
The air horns work fine ... But the compressor is really loud and vibrates to the point you can feel it when sat in the car.
I've watched lots of install videos on YouTube, and no one seems to have the same problem.
Is a very loud and vibrating compressor normal?
I've tried oiling the compressor but this has had no effect.
Does anyone have any Info or ideas?
Thank for your help
-Joe
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 26, 2015 at 2:49 AM / IP Logged Link to Post Post Reply Quote howie ll
Either faulty (bearings) or you need to mount to a solid place.
i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 26, 2015 at 9:52 AM / IP Logged Link to Post Post Reply Quote i am an idiot
I am voting for mount it to a more solid location. If it is mounted to anything that resonates when you tap it, it will be noisy.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 26, 2015 at 10:22 AM / IP Logged Link to Post Post Reply Quote howie ll
I usually make up my own brackets, mount to a bolt through the inner wing (fender) and point the horns down behind the headlight depending on vehicle.
hilux5084 
Member - Posts: 1
Member spacespace
Joined: April 17, 2010
Location: Australia
Posted: August 30, 2015 at 5:09 PM / IP Logged Link to Post Post Reply Quote hilux5084
I have always rubber mounted to inhibit vibrations to the panel

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer