thanks krag357, 2011 Toyota camery se ,40 dot key, prestige 787e and pkall, remote start and lock unlock, no alaram
harness#1124299
1 blue= ign 1=connected =yellow
2 RED / white=+ 12=connected with red too=blk
3 green ig2 = connted=pink
4 pink ig 3=not connected
5 red=connected=+12 v wtth red and white=blk
6 purple acc =connected=white
7 yellw starter=connected= we have statar and stater 2=connected both together =blue and gray
8 RED / blk ign 3=not connected
harness #1124301
1 blk chassis ground= connected to metal surface
2 WHITE/ red parking light input=connected to chassis ground with #1 blk
3 WHITE/ blk + siren output= connected direct + siren positive
4 white= parking light output= connected to(-) parking light blk
harness=112906
1 red (-)door lock= connected=blue
2 green (-) door unlock output=connected=green
3 2nd door unlock output=not connected
harness# 1124300
1 doom lt output=not connected
2 lt blue ground out running output - = connected pkall
3 blk/white horn output(-)= not connected
4 purple (+) door trigger input = not connected
5 bwn/blk (+)inhibit shutdown brake switch = connected at white brake wire
6 dk blue/blk exteenal remote trigger input(-) =not connected
7 ORANGE / blk (-)parking input =not connected
8 grn/yel glow plug input =not connected
9 brown (-) door trigger input =connected blue wire
10 GREEN/ orange tachometer input =connected at tach data link
11 dk green (-)instant trigger input =not connected
12 dk blue channel 3 trunk (-)= not connected
13 gn/blk channel 4 output (-)=not connected
14 dk b be/red=channel 7 output (-)= not connected
15 blk/lt grn pulse after start output (-) = not connected
16 blk/blue= pulse before start output (-)=not connected
17 blk/red=pulse after shut down output (-)=not connected
18 blk / YELLOW pulse during crank output (-) =not connected
19 and 20 channel 5 an 6 output - = not connected
21 gray/blk (-) inhibit shutdown to hood switch = connected to hood pin
22 orange starter inhibit relay control (-) = not connected because not using relay, pkall connectd to rx and tx,please let me know connected anything wrong,thanks for all reply