PKALL + RS2-G3 in 2013 CRV

Home / the12volt's Install Bay / Car Security and Convenience / PKALL + RS2-G3 in 2013 CRV

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

paradoxum

Member - Posts: 2

Joined: October 08, 2015

Location: Ontario, Canada

Posted: October 08, 2015 at 9:48 AM / IP Logged

Greetings,

I'm planning to install a 1 button, 2 way remote starter in a 2013 CRV. I have a PKALL in the mail - I found someone used it on a 2013 with success. I'm looking at the Crimestopper RS2-G3 for the remote starter. Before I pull the trigger I want to ask the braintrust about D2D protocols. From my research I found that the PKALL uses DBI D2D. The RS2-G3 manual is a bit cryptic and states it supports ADS/FORTIN or D2D. Can someone confirm what is the other D2D protocol Crimestopper uses and if the PKALL will talk to the RS2-G3 over D2D at all?

Thanks is andvance.

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: October 08, 2015 at 11:00 AM / IP Logged

Not sure if it really makes much difference, D2D or W2W. There really isn't any D2D comm going on there with this application.

This is only for the transponder bypass and the GWR ( - Status ) signal has to be hardwired anyway. Just as easy to go W2W.

Cut the 4 Pin harness and Pin 3 Black to Chassis ground and Pin 1 Red ( or Blue ) to +12V constant. D2D doesn't really save

much time.

Just follow the Connection #9 wiring diagram and the INSTALLATION WITHOUT D2D wiring for the 4 Pin plug.

Soldering is fun!

Back to Top

paradoxum

Member - Posts: 2

Joined: October 08, 2015

Location: Ontario, Canada

Posted: October 08, 2015 at 11:49 AM / IP Logged

Alright, I'll give it a whirl.

Thanks!

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: October 12, 2015 at 12:02 PM / IP Logged

Kreg is correct on just going wire to wire on that install.

Just to answer your question on the protocol, CrimeStopper works with both Fortin and ADS in full 2-way D2D. It does not work with DEI. Fortin and ADS use a similar protocol which is why they can do this. You do need to pick which module company you are using in the programming of the RS2-G3 though.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.