the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2014 F150 Rev Camera wiring to Factory 4.2 Scree


Post ReplyPost New Topic
< Prev Topic Next Topic >
dragonwolf 
Member - Posts: 2
Member spacespace
Joined: October 08, 2015
Location: Washington, United States
Posted: October 08, 2015 at 2:48 PM / IP Logged Link to Post Post Reply Quote dragonwolf
My 2014 F150 Super Crew is in need of camera wiring. The tailgate logo camera is installed and the loomed wiring has been fed into the cab. Just can't make sense of the multiple wiring suggestions, most of which just say to connect to appropriate wires. I have the red and black bundle. The red is supposed to go to switched 12v power and the black to ground. Just not sure where under (or in) the dash this can be accomplished. The other bundle is the video feed. It is harnessed to an RCA jack. No RCA port on the back of my Factory 4.2" non touch screen. Is there another way to connect the video feed to my system? Any help would be appreciated. Pictures or video would be a welcome bonus.
I tried searching and found nothing specific. I did not scroll theough the 141 pages that came back on the search. I did however, go back to 2009. I think anything beyond that may not work for 2014 model.
*Ford Truck Girl*
icearrow6 
Copper - Posts: 497
Copper spacespace
Joined: February 02, 2009
Location: California, United States
Posted: October 08, 2015 at 3:00 PM / IP Logged Link to Post Post Reply Quote icearrow6
Do you have the 8" screen factory radio?
If so then you are going to need an interface module to add the camera.
I have used the PAC TMC-FD21 successfully.
http://www.pac-audio.com/productDetails.aspx?ProductId=1238&CategoryID=59
dragonwolf 
Member - Posts: 2
Member spacespace
Joined: October 08, 2015
Location: Washington, United States
Posted: October 08, 2015 at 3:07 PM / IP Logged Link to Post Post Reply Quote dragonwolf
The 8" is the My Ford Touch. I have the 4.2" My Ford (non touch) display. The camera and all wiring are Ford parts. Thought it was supposed to be Plug and Play. Guess we were wrong.
*Ford Truck Girl*

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer