2007 Subaru Outback Alarm/Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Subaru Outback Alarm/Remote Start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stickboy0816

Member - Posts: 4

Joined: January 31, 2012

Location: New York, United States

Posted: October 08, 2015 at 9:45 PM / IP Logged

I have a 2012 honda accord with a viper 5904 and a data module that I flashed with an xloader. Tedmond helped me with the install. I want to install an alarm/remote starter in a 2007 subaru outback wagon 2.5i. Just wondering if i should stick with dei because i can use the same color remote for 2 car operation, or are there better choices.

I need to know which module I need and what can be done thru can bus wires, if anything. Also a wiring diagram, and a list of what wires such as lock/unlock, etc are required to be hard wired.

Thanks in advance....

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.