'12 Maxima remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / '12 Maxima remote start problem

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

armbruster

Member - Posts: 32

Joined: March 13, 2003

Location: Kansas, United States

Posted: November 14, 2015 at 7:24 PM / IP Logged

I have a Maxima that I installed a Python 4104P with Smart Start using a DBALL2 in D2D and the system keeps dropping the remotes and stops working. I can reprogram the remotes and it will work for a week or so and then drops the remotes again.

I have replaced the RS and DBALL twice with the same result...tried W2W even with no luck. Looking for any suggestions

Back to Top

shark mobile

Copper - Posts: 83

Joined: November 22, 2014

Location: Ontario, Canada

Posted: November 15, 2015 at 9:45 PM / IP Logged

I know it sounds silly but find a new ground...bad ground will cause all sorts of oddities...and since you replaced the units it has to be a wiring issue...drivers kick is usually a decent place...cheers

Solder, tape, repeat!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.