Clifford 5204x & Audi TT Mk2

Home / the12volt's Install Bay / Car Security and Convenience / Clifford 5204x & Audi TT Mk2

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mmh1

Copper - Posts: 117

Joined: May 10, 2005

Location: United Kingdom

Posted: November 23, 2015 at 5:51 PM / IP Logged

Hi All,

I recently had a Clifford 5204x installed on my Audi TT Mk2 Manual Transmission Diesel.

It was fitted with a 556uw and a DBALL flashed with the correct firmware.

The issue I am having is that on Remote Start (after going through the manual transmission start setup procedure) the factory alarm starts sounding off.

Can anyone advise what might be causing this as on general use the Clifford arms and disarms as well as the factory alarm via the Responder LE remote or the factory fob.

Back to Top

mmh1

Copper - Posts: 117

Joined: May 10, 2005

Location: United Kingdom

Posted: December 07, 2015 at 4:05 PM / IP Logged

Any ideas anyone?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.