67 camaro wiring

Hi there I have decided to go with the compustar 7as brain but can anyone help me with the wiring please I am stumped on the high current and low current harness, here is my options I want if you can tell me which pin goes to which connector -hood pin -siren -door pin -trunk popper solenoid -park light flash -starter kill -tach wire -wanna expand to remote start later on, so wanna drop a aux line for a solenoid that I will add to throttle cable

-hood pin to gray/black on CN5 plug on compustar -siren to brown positive output wire on CN5 other wire on siren to ground. -door pin to RED / wht wire on CN5..jumper setting to + or neg. -trunk popper solenoid -if selonoid is triggered by positive pulse you ned a relay wired like this- pin 85 to violet/wht on CN5 pin 86 to 12v constant pin 87 to 12v constant pin 30 to popper selonoid -park light flash to GREEN/ wht on CN5 for neg or grn/wht on CN1 for positive out to p.lights switch. -starter kill needs a relay pin 85 blue/wht wire on CN5 PIN 86 TO GRN ign wire on CN1 PIN 87A to cut starter wire side going to starter pin 30 to cut starter wire to ign switch -tach wire is yell/blk on CN5 to coil or tach wire in the dash if it has one.

Wow thank you for your help but I did email you and also what about the door locks cause this brain says the connector is a optional piece

doorlock wires: lock output is blue/green on CN5.(neg pulse) unlock output is blue on CN5.(neg pulse)

can I pm also the connections on the CN5 do they need programming or ????