Switchback using stock 2013 Mustang Headlights

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Switchback using stock 2013 Mustang Headlights

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

vartech

Member - Posts: 2

Joined: December 27, 2015

Location: New York, United States

Posted: December 27, 2015 at 4:23 PM / IP Logged

I have a set of 2013 mustang headlights. I am trying to use the drl and have the turn signal turn of the drl when active. I am using a morimoto switchback driver but I believe that driver cuts the ground not power. The issue is the headlight assembly uses a common ground for drl and highbeam and when the turn signal is on the drl turns off and the high beam does not work. I need help coming up with a solution.

Back to Top

vartech

Member - Posts: 2

Joined: December 27, 2015

Location: New York, United States

Posted: January 15, 2016 at 8:34 PM / IP Logged

found solution use diodedynamics ds1

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.