the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Need Advice on a box build


Post ReplyPost New Topic
< Prev Topic Next Topic >
peck76_2000 
Member - Posts: 10
Member spacespace
Joined: December 02, 2011
Location: Iowa, United States
Posted: January 23, 2016 at 9:16 AM / IP Logged Link to Post Post Reply Quote peck76_2000
Ok, I just need a yay or nay on this box build if someone could help me out. In case you can't read the numbers, it's all OD 40"x 11.5"x 16.5"x 9". The port, by the 12volt calculator is 3.5"x4.75"x7.26" made from 3/4 mdf. I would just like to know if this enclosure will work for my 2-10" crossfire W10D's. This will be my first slotted port build and the subs say to tune to 32hz. Any advice/corrections would be helpful. Thanks.
Need Advice on a box build - Last Post -- posted image.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer