How to starter kill Suburban and Camry with PTS?

Home / the12volt's Install Bay / Car Security and Convenience / How to starter kill Suburban and Camry with PTS?

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

dosoft

Member - Posts: 30

Joined: December 10, 2012

Location: New York, United States

Posted: January 31, 2016 at 6:00 PM / IP Logged

A) Oh, I got you now :) it's easy for you, because you have the steering wheel on the right. The both glove boxes (upper and lower) come out in seconds, but we have it here on the right. On the left, by the BCM you have the panel under the steering wheel, airbag for the knees and the pedal's cover to remove just to see it.

B) I am talking about the power to the ignition switch, not about the ignition signal wire. Those Mercedes ignition switches, you're talking about, if you disconnect the power to them, the vehicle immediately shuts down. I have tried it before.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 01, 2016 at 1:11 AM / IP Logged

It's irrelevant, we're doing this to a vehicle that's static.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.