the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Setting up Viper 3305v for Door Poppers


Post ReplyPost New Topic
< Prev Topic Next Topic >
seattle_ice 
Member - Posts: 37
Member spacespace
Joined: May 22, 2008
Location: Washington, United States
Posted: April 13, 2016 at 5:55 PM / IP Logged Link to Post Post Reply Quote seattle_ice
davep. wrote:
Ok. Now I understand. That will work. You don't need the 'upper' diodes on the relay coils. Just the ones between the module and the system. Unless you use the "momentary key=on" and "momentary off" switches you have in the first diagram. Then you DO need the upper diodes, or the momentary switches for the power latch will actuate the lock module.
Sounds like a cool project.
I removed the switches from the diagram for clarity, but they are there, so if they get used, I think those upper two diodes should stay.
Those two switches, plus two momentary push buttons to open the doors are there in case you don't have your remote, or the battery dies or something. The trunk also has the keyed lock so in case the battery goes dead, you can still get in to jump/charge it and open the doors/etc.
seattle_ice 
Member - Posts: 37
Member spacespace
Joined: May 22, 2008
Location: Washington, United States
Posted: April 13, 2016 at 6:03 PM / IP Logged Link to Post Post Reply Quote seattle_ice
If you are interested, this is (mostly) the wiring now. I did use small parts of the original harness for fitment and convenience, like the firewall bulkheads.
Setting up Viper 3305v for Door Poppers - Page 2 -- posted image.
seattle_ice 
Member - Posts: 37
Member spacespace
Joined: May 22, 2008
Location: Washington, United States
Posted: April 18, 2016 at 6:46 PM / IP Logged Link to Post Post Reply Quote seattle_ice
Ok, here is my almost final setup. Any problems with this that are obvious?
Setting up Viper 3305v for Door Poppers - Page 2 -- posted image.
Page of 2

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer