fiquring how to wire up 4 wire siren

Home / the12volt's Install Bay / Car Security and Convenience / fiquring how to wire up 4 wire siren

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tino711

Member - Posts: 3

Joined: April 18, 2016

Posted: April 18, 2016 at 2:01 PM / IP Logged

Hello I need help figuring out how do I wire up a Bmw 4 wire siren to a 2 wire alarm system like a viper alarm? Please any help would be greatful

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 19, 2016 at 11:24 AM / IP Logged

Can you tell us what the 4 wires are for? Any help would help us help you.

Back to Top

tino711

Member - Posts: 3

Joined: April 18, 2016

Posted: April 19, 2016 at 12:09 PM / IP Logged

Yeah it is a bmw oem siren it has four connectors they are

1.ground

2.tilt sensor

3.12volt constant

4. GM signal

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.