Dball2 and key issues

Home / the12volt's Install Bay / Car Security and Convenience / Dball2 and key issues

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

spastik monkey

Member - Posts: 1

Joined: April 07, 2007

Location: Oklahoma, United States

Posted: April 22, 2016 at 11:02 PM / IP Logged

Ok,

Helped my roommate put his viper in his 2010 camry. I tagged all the wires for him and he installed everything. Got it all plugged in and it worked great. All of a sudden, a week later, nothing. I've switched out the dball2 unit for another new one, still same issue. The alarm unit seems to work fine as it will go through the procedure, but the car doesn't start due to immobilizer. I wiped the dball and started over, but now i don't get any lights from it in the car. I checked, and it is getting power and ground from the alarm to the brain. I've been out of install for a while, so I'm just getting used to these did modules. Any ideas?

Back to Top

Search for other posts by spastik monkey

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.