1999 Lancer door locks issue

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Lancer door locks issue

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

maiato

Member - Posts: 1

Joined: May 02, 2016

Posted: May 02, 2016 at 5:02 PM / IP Logged

Hi all

My power doors lock is not working. The problem is my ETAC

Trying to do power door locks using two 5 pins relays, wich is possible by reversing the poliarity.

My question is:

If i connect only the drivers door to the relays, will all the other door work to, or i have to find the other wires from the other doors and connect them too?

It´s a Mitsubishi Lancer GLX 1999.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.