LED Bulbs Strobing Setup

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / LED Bulbs Strobing Setup

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ekillingbeck

Member - Posts: 1

Joined: May 05, 2016

Location: United Kingdom

Posted: May 05, 2016 at 4:37 AM / IP Logged

Hi All,

I'm looking to incorporate my LED bulbs into a strobing setup (warning lights)...

I'd be using the indicators, DRLs and Reverse lights, and wiring them into my strobe controller circuit.

My question is:

If I were to do this, would I need a couple of diodes in there? One on the existing line going to the bulb, and one on my new strobe line going to the bulb?

I just don't want any current trickling back up to the standard electronics and possibly frying something in the dash etc.

Any help would be appreciated.

FYI, the car in question is a Vauxhall Mokka (Buick Encore), and I've fitted it with aftermarket LED bulbs in all the mentioned places.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.