Starting the old amp

Home / the12volt's Install Bay / Car Audio / Starting the old amp

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

camperuros

Member - Posts: 5

Joined: May 13, 2016

Posted: May 13, 2016 at 10:56 AM / IP Logged

Hi guys,

I get a Pioneer GM3400 amp, and i would like to use it at home(cuz i have no car yet!).

So i get a proper PSU for it, now i dont know how to start it, it have one connector with 3 wieres,(red-on/off 12V ; blue-goes to car radio ; yellow-lighting switch).

How to start it?

Thanks!

P.S. (Sorry for bad english)

Back to Top

laws

Member - Posts: 11

Joined: April 23, 2016

Location: Illinois, United States

Posted: May 28, 2016 at 12:27 PM / IP Logged

Do you have a head unit you are hooking the amp to?

Back to Top

camperuros

Member - Posts: 5

Joined: May 13, 2016

Posted: May 30, 2016 at 4:11 AM / IP Logged

Thanks for reply, i found solution.

I need an soft starter, with him i switch amp on normaly.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.