Viper 5704v Remote start alarm, 2003 Ford Taurus

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Viper 5704v Remote start alarm, 2003 Ford Taurus

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mrdennisg

Member - Posts: 3

Joined: May 25, 2016

Location: Arizona, United States

Posted: May 25, 2016 at 12:01 PM / IP Logged

I want to install Viper 5704v Remote start alarm in my 2003 Ford Taurus that has a factory entry/panic/trunk & door unlock key fob already.

Do I have to by-pass the factory system?

Is there any diagrams here to get started?

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: May 25, 2016 at 8:23 PM / IP Logged

Are you sure you have a factory alarm? Or just a panic button from the FOB?

to test for a factory alarm, rolldown the drivers window,close all the doors, lock the car with the fob. Wait a couple of minuets, reach inside the open window and open the door from the inside. If the horn sounds and lights flash you have a factory alarm.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

kreg357

Platinum - Posts: 7,783

This member has been recognized as an authority in Electrical Theory. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: May 25, 2016 at 9:26 PM / IP Logged

You're in luck! Here is a link to a Pictorial on your car :

https://www.the12volt.com/installbay/forum_posts.asp?tid=135035

You won't be bypassing any factory system, like the factory alarm ( if present ). You will need to "bypass" the cars

PATS3 transponder ignition immobilizer system during a remote start up. However that bypass does not interfere with or

disable the system at any other time. More info about this can be found in the pictorial.

Soldering is fun!

Back to Top

mrdennisg

Member - Posts: 3

Joined: May 25, 2016

Location: Arizona, United States

Posted: May 25, 2016 at 9:39 PM / IP Logged

Tried what you said, it has no alarm just a panic button

Back to Top

mrdennisg

Member - Posts: 3

Joined: May 25, 2016

Location: Arizona, United States

Posted: May 25, 2016 at 10:28 PM / IP Logged

kreg357 wrote:

You're in luck! Here is a link to a Pictorial on your car :

https://www.the12volt.com/installbay/forum_posts.asp?tid=135035

Thanks....lots of info ther, Great Job

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.