the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Dimming LEDs


Post ReplyPost New Topic
< Prev Topic Next Topic >
davidhaller 
Member - Posts: 16
Member spacespace
Joined: June 15, 2016
Location: United States
Posted: June 20, 2016 at 3:57 PM / IP Logged Link to Post Post Reply Quote davidhaller
Hello, I have a 12v 27w led flood light. I would like to dim it using a resistor. I would like it dimmed to about a quarter of its original power. I would like to know how to wire it and what type of resistor I would need.
Thanks.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer