Control center button disarm change

Home / the12volt's Install Bay / Car Security and Convenience / Control center button disarm change

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mmatrisch

Member - Posts: 39

Joined: April 23, 2016

Location: Illinois, United States

Posted: June 22, 2016 at 3:05 AM / IP Logged

Does anyone know how to change the number of times the control center button has to be pressed in order to do a manual disarm with the key ? Directed says the installer has to do it I have my own bit writer I just can't seem to find that option.

Matt

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: June 22, 2016 at 11:12 AM / IP Logged

I don't know that there is a change. It is turn the ign ON then press the button. That will disarm the system, at least it used to be. It has been a while since I have installed DEI.

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: June 22, 2016 at 12:37 PM / IP Logged

This was several years ago, but my on my old Viper it was menu 2 (convenience features), item 3 (valet switch pulse count). It was adjustable from 1 to 5.

My ex once told me I have a perfect face for radio.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.