12v deactivation with negative input

Home / the12volt's Install Bay / Relays / 12v deactivation with negative input

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

167mph

Member - Posts: 6

Joined: July 05, 2016

Location: California, United States

Posted: July 05, 2016 at 1:58 PM / IP Logged

Hello all,

I have searched and I have not been able to find the answer. I apologize in advance if I missed it.

I need to deactivate an ignition 12v feed with a negative input. In the absence of this negative input, I need for the circuit to operate normally. Any help would be greatly appreciated.

Tony

Back to Top

tonanzith

Gold - Posts: 593

This member consistently provides reliable information

Joined: July 18, 2008

Location: Washington, United States

Posted: July 05, 2016 at 11:22 PM / IP Logged

Here

12v deactivation with negative input - Last Post -- posted image.

Gary Sather

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 06, 2016 at 12:31 PM / IP Logged

BTW that should only be momentary, if it's on constantly it will drain your battery, if you intend using it as an immobiliser I suggest making terminal 86 IGN rather than battery.

Back to Top

167mph

Member - Posts: 6

Joined: July 05, 2016

Location: California, United States

Posted: July 09, 2016 at 6:25 PM / IP Logged

Thank you for the help!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.