2009 Lexus Rx350 Viper 5706v with flashlogic

Home / the12volt's Install Bay / Car Security and Convenience / 2009 Lexus Rx350 Viper 5706v with flashlogic

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jimmy317

Member - Posts: 7

Joined: June 19, 2016

Location: Indiana, United States

Posted: July 07, 2016 at 12:58 AM / IP Logged

I just installed viper 5706v with flashlogic bypass module on 09 lexus rx350. The remote starter worked fine but door lock/unlock, factory armed/disarmed is not associated with viper remote.

My understanding is that for next step I need to hook up factory armed/disarmed wires at the driver door to the viper 24-pin harness to make it work. Can I also hook up the trunk wire so I can open/close the hatch with viper remote?

I had a hard time looking for the autolight (brown) wire under the steering column to wire to status outpu with a relay to turn off the headlight when RS turns off. Can someone please tell me where to locate it?

Thank you for your help

Jimmy

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.