smartstart issues

Home / the12volt's Install Bay / Car Security and Convenience / smartstart issues

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

cuda1979

Member - Posts: 10

Joined: April 09, 2016

Location: Indiana, United States

Posted: July 09, 2016 at 1:11 PM / IP Logged

Update. success I found the problem the install guide was wrong. I had the red and black connector hooked up and I was using the black 3 pin ESP connector that matched up with the 3 pin black port on my module. whitch did not work. So I used the blue,green, and white and blue wires from the 5 pin connector ran the blue and green to the 3 pin door lock connector wires and ran the white and blue wire to the remote start activation wire at the 24 pin connector. And it works like a champ.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.