Viper 5607v and fashlogic 2009 lexus RX350

I need help badly!!!! I installed the viper 5607v remote starter with flash logic bypass module. The remote starter worked but I couldnt get the viper remote to work with door lock and trunk. I tried hooking up 14 GREEN/ BLACK (-) 200mA FACTORY ALARM DISARM OUTPUT To factory alarm disarm wire (grey) on the driver door lock switch 24 GREEN / WHITE (-) 200mA FACTORY ALARM ARM OUTPUT to factory alarm arm wire (brown) on the driver door lock switch Its not working and I dont know what I do wrong.. Please help!!! Can someone please help me on how to hook up door lock unlock, factory arm/disarm and trunk opener. If any you you know of any bypass module that would work with 09 lexus rx350 without having to hook up door/trunk function manually. Please let me know. Thank you for your help Jimmy

I hooked up the door lock wire from viper to oem arm and door unlock to oem disarm wire. The arm button works fine and locks the doors but the disarm button would not unlock the doors even I set oem disarm to double pulses. Please tell me what I did wrong Also, I have been searching and came across fortin universal bypass module. I wonder if that would help with the keyless entry. have anyone used it? Thanks Jimmy

Where are you grabbing the wires? The window master switch? And have you metered the wires to confirm. Also meter the wire from the viper to confirm it is giving a double pulse on disarm. If not use the door lock and unlock wires from the viper and program it for double pulse unlock and try that.Gary Sather

Thank you for your reply. Now I un-taped oem arm output from viper to the oem arm wire, the oem disarm/unlock is working. But as soon as I tap in the oem arm, only the oem arm/lock is working and the oem disarm/unlock stops working. I wonder if I need a relay or diode to connect to this wire? Thanks Jimmy