Fiat Freemont Remote start

Hello friends, Can someone help me to find wiring diagram for Fiat Freemont year 2012. I hope i will get a help here. Thanks!!Peace and Love

2011-2016 Dodge Journey crossover (a/k/a Fiat Freemont) is the answer to you question. Still need to verify wires for proper operation Dodge Journey 2011- PART       COLOR      LOCATION 12 VOLT CONSTANT      RED (+)      @ BCM, LT.GRAY 4-PIN PLUG(C2), PIN 3, SEE NOTE #2 STARTER      LT.BLUE/TAN (+) for STARTER KILL ONLY!!      @ BCM, BLACK 24-PIN PLUG(C1), PIN 19, SEE NOTE #2 STARTER 2      PURPLE / LT.BLUE (?)      @ KEYLESS IGNITION NODE (START/STOP Button) BLACK 6-PIN PLUG, PIN 4 IGNITION 1      PINK/WHITE (+)      @ BCM, BLACK 48-PIN PLUG(C5), PIN 27, SEE NOTE #2 IGNITION 2      N/A      IGNITION 3      N/A      ACCESSORY /HEATER BLOWER 1      N/A      ACCESSORY /HEATER BLOWER 2      N/A      KEYSENSE      N/A      PARKING LIGHTS ( - )      EHITE/BROWN (-) THRU a 1130 Ohm resistor, use a Relay to ISOLATE Switch      @ BCM, BLUE 24-PIN PLUG(C7), PIN 20, SEE NOTE #2 PARKING LIGHTS ( + )      SEE NOTE #3      @ BCM, SEE NOTE #2 POWER LOCK      PURLE/LT. GREEN (-) THRU a 330 Ohm Resistor will LOCK      @ BCM, BLACK 48-PIN PLUG(C6), PIN 23 (without One-Touch up Windows) SEE NOTE #2 POWER UNLOCK      using same wire, a (-) THRU a 100 Ohm Resistor will UNLOCK      DIAGRAM DOOR TRIGGER      PURPLE (-)      @ BCM, BLACK 48-PIN PLUG(C6), PIN 25, SEE NOTE #2 DOMELIGHT SUPERVISION      YELLOW/PURPLE (+)      @ BCM, BLUE 24-PIN PLUG(C7), PIN 14 SEE NOTE #2 TRUNK RELEASE      N/A      SLIDING POWER DOOR      N/A      HORN      DK.GREEN / WHITE (+)      @ BCM, BLACK 24-PIN PLUG(C1), PIN 23, SEE NOTE #2 TACH      BROWN / YELLOW, BROWN / DK.BLUE, BROWN / LT.BLUE, BROWN / TAN, BROWN / ORANGE or BROWN / PURPLE (AC)      @ Any FUEL-INJECTOR, 2-PIN PLUG, PIN 2 WAIT TO START LIGHT      N/A      BRAKE      DK.GREEN / WHITE (+)      @ BCM, WHITE 24-PIN PLUG(C4), PIN 18, SEE NOTE #2 FACTORY ALARM DISARM      N/A      ANTI-THEFT      NO INFORMATION AT THIS TIME!! See NOTE #1      EXTRA INFORMATION NOTE #1: There is NO INFORMATION on the ANTI-THEFT SYSTEM or an INTERFACE BYPASS MODULE for this vehicle AT THIS TIME!! NOTE #2: The BCM is located Behind the GLOVE BOX. NOTE #3: The LEFT FRONT Parkinglight wire is a WHITE/ BROWN (+) @ BCM, BLACK 24-PIN PLUG(C1) PIN 4, the RIGHT FRONT Parking light wire is a WHITE/ ORANGE (+) @ BCM, WHITE 24-PIN PLUG(C4) PIN 3, the LEFT REAR Parking light wire is a WHITE/ GRAY (+) @ BCM, BLACK 48-PIN PLUG(C6) PIN 32 and the RIGHT REAR Parking light wire is a WHITE/ ORANGE (+) @ BCM, BLACK 48-PIN PLUG(C5) PIN 4, when connecting use a relay for each to isolate.

These will need to be verified to work with the FIAT Journey by the respective Manufactures! Bypass Fortin Dodge Journey 2012 (with Push-to-Start) EVO-CHRT6 or EVO-ONE Bypass Xpresskit Dodge Journey 2012 (with Smart Key) XK09, DBALL/2/PRO

Euro car Lurch!! Will probably need a key in box or key wrap if it's of European origin.

Forget my post. It looks like a US build, haven't needed key wrap etc. on Chrysler Jeeps sold in Europe so you should be OK with what Lurch suggested, DB-ALL2 works fine on Jeeps.

ok thanks for your help, I will give a feedback here later.Peace and Love