the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 Nissan Micra K11, Installing Alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 29, 2016 at 11:23 AM / IP Logged  
I swore I'd never do this but don't post again:-
micra_99_2.png
That's everything. Mount under the instrument panel or even behind, 4 to 6 Philips No. 2 will pop the cowling and the gauges. 5 amp wire is fine.
The diodes are obtained at Maplin.
Out of interest the alarm will blow its fuse as soon as you activate, 10 amps for the indicators plus 15 for the locks. They should have built it with a separate power feed (15 amp fused) for the locks. Hence piece of garbage.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: August 29, 2016 at 3:19 PM / IP Logged  
turbazzz wrote:
I mean I already have factory immobiliser which works off a blue-chip in the key, what IF ( big if lol) I want to install the alarms immobiliser function, how would this work.
Will the factory immobiliser have to be removed ? Surely you can't have two
You can add as many as you want to have. And still leave the factory immobilizer. This china immobilizer interupts the ignition wire with the relay and has the hijack mode or immobiliser.
Hijack mode works by enabling it with the remote, leave key in running vehicle and yank remote off as you get out, thief drives away until timer runs out and ignition is shut off.
With no remote and a timed ride he ain't coming back for the remote. LOL2001 Nissan Micra K11, Installing Alarm - Page 3 -- posted image.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: August 29, 2016 at 5:00 PM / IP Logged  
Final note make sure that you understand that @howie II and I have gone over what to do in great detail.
And that you have read repeatedly what we have said and understand what you are doing, and is at your own risk!
If your are not totally sure what you are doing stay away from cutting any factory vehicle wires until you do.
turbazzz 
Member - Posts: 32
Member spacespace
Joined: August 28, 2016
Posted: August 29, 2016 at 5:23 PM / IP Logged  
Can the old factory   Immobiliser be removed ? Or is this tapped in to ECU? Just curious that's all..
turbazzz 
Member - Posts: 32
Member spacespace
Joined: August 28, 2016
Posted: August 29, 2016 at 5:24 PM / IP Logged  
It's factory fitted Nats
turbazzz 
Member - Posts: 32
Member spacespace
Joined: August 28, 2016
Posted: August 29, 2016 at 5:43 PM / IP Logged  
2001 Nissan Micra K11, Installing Alarm - Page 3 -- posted image.
What do I do with the wires I am not using just cut them short ?
What do I do with the double black one, because you said earlier its given me a choice of earth. Should I join both wires in separate places ?
Also do you know The yellow wire, I don't need this right ? Is it okay to cut this short...
turbazzz 
Member - Posts: 32
Member spacespace
Joined: August 28, 2016
Posted: August 29, 2016 at 5:55 PM / IP Logged  
howie ll wrote:
The diodes are obtained at Maplin.
I will not need this i'm not installing trunk or bonnet switch.
But do i need it for Side door switch ?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 29, 2016 at 6:15 PM / IP Logged  
No and yes if the supplied relay doesn't have one.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: August 29, 2016 at 6:17 PM / IP Logged  
turbazzz wrote:
Can the old factory   Immobiliser be removed ? Or is this tapped in to ECU? Just curious that's all..
Not easily as its part of the ECU you would need to have the ECU re-flashed with the NATS delete which would require sending it out to somone that has done it before.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: August 29, 2016 at 6:24 PM / IP Logged  
turbazzz wrote:
howie ll wrote:
The diodes are obtained at Maplin.
I will not need this i'm not installing trunk or bonnet switch.
But do i need it for Side door switch ?
On your vehicle, ,You only need to diode trigger inputs when connecting more than 1 trigger.
If you install the starter immobilizer relay in @howie II diagram and it doesn't have a diode pre wired you will need to add one.
Page of 7

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer