Bypass 2006 jeep commander factory amp

Home / the12volt's Install Bay / Car Audio / Bypass 2006 jeep commander factory amp

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

podmen311

Member - Posts: 4

Joined: September 12, 2016

Location: Minnesota, United States

Posted: September 12, 2016 at 9:30 PM / IP Logged

Getting alternator whine and can't get rid of it, I've tried everything g! Help!

Podmen311MN

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: September 13, 2016 at 1:40 PM / IP Logged

What have you done?

Upgrades, add-ons?

Methods to eliminate alternator whine you have tried in detail?

Back to Top

podmen311

Member - Posts: 4

Joined: September 12, 2016

Location: Minnesota, United States

Posted: September 13, 2016 at 7:35 PM / IP Logged

I've got everything hooked up properly, grounds are perfect. I've got an interface installed. It's not coming from the rca's amp o4 sub. Even with the stock BA amp unhooked there is still a faint whine. Most of the whine comes from the front driver side dash speaker

Podmen311MN

Back to Top

podmen311

Member - Posts: 4

Joined: September 12, 2016

Location: Minnesota, United States

Posted: September 13, 2016 at 7:41 PM / IP Logged

Do it need to bypass factory amp?

Podmen311MN

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 13, 2016 at 7:56 PM / IP Logged

Did you add an aftermarket amplifier? If so, turn the gain controls on that amp all the way down. Do you still hear the noise?

We have no idea if you need to bypass the factory amplifier. We do not even have a clue as to what the system consists of.

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: September 14, 2016 at 12:00 AM / IP Logged

i am an idiot wrote:

Did you add an aftermarket amplifier? If so, turn the gain controls on that amp all the way down. Do you still hear the noise?

We have no idea if you need to bypass the factory amplifier. We do not even have a clue as to what the system consists of.

Exactly why I asked what was installed and how?

Back to Top

podmen311

Member - Posts: 4

Joined: September 12, 2016

Location: Minnesota, United States

Posted: September 14, 2016 at 8:25 AM / IP Logged

Pretty simple here people, factory amp and aftermarket HU. I'm getting whine. How to I remove it? Pretty straight forward.

Podmen311MN

Back to Top

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: September 14, 2016 at 3:35 PM / IP Logged

First thing I would try is to ground the chassis of the Aftermarket HU to the vehicle.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.